DEMANDEZ UN DEVIS GRATUIT DÈS MAINTENANT !

Démonstration du formulaire de contact (#3)

Capteur de débit F13, connecteur à double tête pour turbine, durée de vie de 200 000 cycles

F13 belongs to the flow sensor turbine type which is designed by the Karman vortex principle. It is widely used in gas boilers, water heaters, water dispensers, washing machines, and dishwashers.

Partager cette page

Flow Sensor Turbine Feature

The F13 is a flow sensor turbine type and the hall sensor can detect the speed and change it into the square wave frequency so you can use the oscilloscope to read the value. This kind of flow sensor has a high-precision output and works stably as well as the sensor cost is not expensive.  And the electromagnetic compatibility

Meanwhile, it requires a very low working voltage that is from 4.75 VDC to 5.25 VDC so that it will be safe for the operator. Its working temperature is from -15 to 85 ℃, which is a wide range. As well as this flow sensor has a long working life which is more than 200,000 hours.

Besides, the F1 series also has the F11, F12, and F13 sensors for your options, which are dependent on your installation requirement because the port for connection is different. For example, the F11 has 2*G1/2, the G12 has 1*G/12 & 1*quickly connect, and the G13 has 2* quickly connect. Welcome to contact us to get more details.

What’s more, as a professional supplier, we not only supply different kinds of flow sensors but also supply air pressure switches & sensors, water pressure level switches & sensors, and safety valves, etc.

Flow-sensor-series

 

Flow Sensor Turbine Specification

Numéro de modèle Capteur de débit F13
Type de terminal Connecteur et câble standard à 3 broches (longueur standard de 150 mm, personnalisable)
Type d'interface 1*G1/2 & 1*quickly contact connector
intervalle de débit de fonctionnement 1 L/min à 30 L/min
Force diélectrique 500 VCA (<3 mA)
Tension de fonctionnement 4,75 V CC à 5,25 V CC
Courant de fonctionnement 15 mA

Cycle de service à faible puissance

50%
Pression de surcharge 12 bars (à 40 °C)
Température de fonctionnement -15 à 85℃
Durée de vie avec charge 200 000 cycles
Niveau de protection IP20
Produits associés

DEMANDEZ UN DEVIS GRATUIT DÈS MAINTENANT !

Démonstration du formulaire de contact (#3)