Capteur de débit

Flow Sensor Switch Detector SMT Hall Effect 1 to 30L/Min

F31 liquid flow sensor switch uses SMT and glue to seal the Hall element so that it has a good performance in a humid environment. Which is suitable for boilers, water heaters, etc.

OEM / ODM RoHS / REACH Échantillons personnalisés

F31 Flow Sensor Switch Description

The F31 flow sensor switch can detect the flow rotational speed and output the SWFM through the Hall sensor from the circuit board. It also has a wide working flow range that is from 1.0L/Min to 30.0L/Min. So, it covers many kinds of products, such as the boiler, water heaters, hanging furnaces, water dispensers, drinking fountains, and so on. Meanwhile, the F3 series use the latest sealing process to increase the working performance in a wet environment. This kind of sealed structure does not need to install the screw so it also has a higher bearing capacity. We also got the patents for the F3 series water flow sensors, which patent number is “201920158951.X”.

Besides, the F3 not only has a good electromagnetic compatibility characteristic but also has a wide working temperature range, please check the specification as following below. Because of the rational design, it has a few losses for the pressure when working. What’s more, the impeller can reduce the blocking happen and keep it clean.

F31 water flow sensor switch connection is through 2 pieces of G1/2 connector while the F32 has 1*G1/2 & 1*quick connector, and F33 has 2*quick connectors. Welcome to contact us to get the other senor’s information.

All in all, the F31 flow sensor switch is of high quality and has good performance in detecting, welcome to contact us to get more information. If you need to check more types of flow sensors, please click the link to check. Generally, the water heaters & boilers not only need the flow sensor switches but also need the air pressure switches et relief valves as well, which are also available from REGAL.

 

Flow Sensor Switch Specification

Numéro de modèle F31 Flow Sensor Switch
Type de terminal connecteur standard 3 broches & fil (standard 150mm et il peut également être personnalisable)
Type d'interface 2*G1/2
Intervalle de fonctionnement 1 L/min à 30 L/min
Résistance diélectrique 500VAC(<3mA)
Tension de fonctionnement DC 4.75V à DC 5.25V
Fonctionnement actuel 15mA

Cycle de service à faible rendement

50%
Pression de surcharge 12bar (@40°C)
Température de travail -15 à 85°c
Durée de service avec chargement 200000 cycles
Niveau de protection IP20

Les spécifications sont configurées par projet. Contactez notre équipe d'ingénierie pour la fiche technique actuelle, les dessins et la disponibilité des échantillons.

Produits connexes

Plus de cette famille

Besoin d'un interrupteur de pression qui correspond à votre conception?

Envoyez-nous votre point de départ, différentiel, média et volume annuel. Nous recommandons la plateforme la plus proche et citons un échantillon personnalisé.

WhatsApp