What to do if your wall furnace pressure switch shorts out?


When the wall-hung boiler appears pressure switch short circuit, you should follow the steps below to deal with:

Confirm the location of the short circuit: first determine the exact location of the short circuit, which can be detected by using tools such as a voltmeter and an ammeter to determine the cause of the short circuit may be aging wiring, improper operation, flashbacks or switch quality problems.1

Replacement of aging wiring: If the short circuit is caused by aging wiring, it is necessary to replace the wires and cables with new ones, and cut off the shorted part and reconnect it to the circuit to ensure the normal operation of the circuit.

Proper use and maintenance of the switch: If the switch failure is caused by improper operation, you should pay attention to the proper use and maintenance of the wall oven switch in your daily life to avoid causing short circuit failure again.

Replacement of damaged switches: If there are quality problems with the switch itself, you should replace it with a new one in time and choose a good quality switch with a reliable brand name to ensure that it can be used safely and reliably for a long period of time.

Check other components: In addition to the pressure switch, you need to check other components of the wall furnace, such as the pressure control valve, pressure gauge, safety valve, etc., to ensure that they are all in normal operating condition. Also, check for leaks in the areas where pipes connect to the unit. 2

Consider structural improvements: If the design of the wall-hung boiler is defective, it may be necessary to make local improvements or repairs, such as adding the necessary insulation and reinforcing the furnace body to improve the reliability and durability of the furnace.

Professional Repair Service: If you are unable to determine the exact location of the short-circuit yourself or do not have the appropriate infrastructure and professional tools, it is recommended that you contact a professional repair service to perform accurate diagnosis and repair work.23

In conclusion, a short-circuited wall furnace pressure switch is a problem that needs to be treated with caution, and appropriate measures need to be taken to solve the problem according to the specific situation in order to ensure a safe and comfortable living environment.



ONE-STOP manufacturer to manufacture the flow sensor, water level switch, water pressure switch, and air pressure switch. Reach R&D ability & High production capacity

Recent Posts


Contact Form Demo (#3)